Page 110 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 110
108
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Design Size/mm PU Article no.
Design Size/mm PU Article no.
Pocket saws PUK Vario
innovative small saw bow of 10 x 5 mm flat steel, high-gloss zinc plating, with ergonomic, glass fibre reinforced
plastic handle, blade tension via embedded knurled screw. 65 mm high sawing space. In two different lengths,
each with universal saw blade.
Vario 150 weight 165 g 260 1 12 0515
Vario 200 weight 177 g 310 1 12 0520
Pocket saws PUK
span width 150 mm, with metal cutting saw blade
with adjustable polished wooden handle 3 12 0500
with firm, lacquered wooden handle 6 12 0502
Pocket saw PROFI
with universal blade
Span width 150 mm 10 12 0490
1000 V Saw bow
fully insulated
Span width 150 mm 250 1 12 0700
Bulk saw blades
according to DIN 6494 Form C, 150 mm length, 6 mm width, 0.4 mm thickness
Wood cutting saw blade for hard and soft woods, chipboard and hardboard, soft plastic, etc.
Tooth pitch 1.8 mm (14 teeth per inch) 150 12 12 0504
as above but for Vario 200 200 12 12 0505
Universal saw blade for steel, aluminium, nonferrous metals, fibre glass, plastic conduit and tubing,
mineral, rigips and cement asbestos boards
Tooth pitch 1.0 mm (25 teeth per inch) 150 12 12 0506
as above but for Vario 200 200 12 12 0507
Metal cutting blade for all metals, non-ferrous metals (copper), stainless steel, special alloys, Plexiglas ® and plastics
Tooth pitch 1.2 mm (32 teeth per inch) 150 12 12 0512
as above but for Vario 200 200 12 12 0513
Saw blade set
according to DIN 6494 Form C, 150 mm length, 6 mm width, 0.4 mm thickness. Contains 3 each of the following:
universal saw blade (tooth pitch 1.0 mm (25 teeth per inch)), metal cutting saw blade (tooth pitch 0.8 mm
(32 teeth per inch)), fine metal cutting saw blade for especially fine, burr-free cuts even in very thin sheets
(tooth pitch 0.5 mm (50 teeth per inch)), wood cutting saw blade (tooth pitch 1.8 mm (14 teeth per inch))
1 12 0508
Metal hacksaw frame
especially light and simultaneously very stable metal cutting saw for 300 mm saw blades. Made of die cast aluminium
in an erg onomic design, with soft rubber inserts on the handle and front grip. High cutting precision of the blade in
straight and 40 degree position due to captive locking pins. The blade can be tightened up to 800 N via the turn-lock
fastener in the handle. Delivery incl. a bi-metal cutting saw blade.
Span width 300 mm weight 650 g 1 12 0602
Metal hacksaw frame
hacksaw with innovative quick release on the two-component handle for single-sided saw blades DIN 6494 Form A.
With improved grip due to nonslip plastic and additional front slide protection, glossy chrome-plated,
with captive locking pins.
Span width 300 mm 520 6 12 0600
Metal hacksaw frame
adjustable, made of right-angle steel tubing, material thickness 16 x 10 mm, red powder coating, with attachment pin
Span width 300 mm 6 12 0607
1000 V Hacksaw frame
fully insulated hacksaw with innovative quick release on the handle for single-sided saw blades DIN 6494 Form A.
With improved grip due to nonslip plastic and reduced weight.
Span width 300 mm weight 785 g 520 1 12 0702
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de
