Page 122 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

120

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design Size/mm PU Article no.
Design Size/mm PU Article no.

Toothed chisel

for the restoration of joints and masonry.
32 mm 300 1 20 8052
Mortar chisel

for the removal and cleaning of joints in masonry and mortar.
10 mm 300 1 20 8054
Tile chisel

for the removal of tiles.
50 mm 300 1 20 8056
Winged chisel

for the stemming, cutting and pulling of channels with a depth restriction.
35 mm 380 1 20 8058
Impact core bit

the 6 accurately ground blades soldered with silver achieve excellent durability, even when dealing with hard
materials. The hardened steel body with M 16 female thread and the optimised concentricity is ideally suited for
concrete, stone, masonry, bricks, tiles and lightweight construction materials.
Receiver shaft in hexagonal or SDS-plus version. Low-wear hard metal teeth with slot soldering ensure
maximum stability. With interchangeable centring drill bits for light impacting use (material dependent),
precise incorporation of switch / distribution boxes.
Drilling ø mm
Impact core bits in hexagonal version 68 1 20 7311
80 (82) 1 20 7315
Impact core bits with SDS-Plus
68 1 20 7321
80 (82) 1 20 7325
Centring drill bit 9 (8) 1 20 7340
Hexagonal receiver shaft Size 12 100 1 20 7330
SDS-Plus receiver shaft 110 1 20 7334
HSS step drill

especially for screwed cable glands in electrical assembly, perfectly round and cylindrical holes in various diameters,
centring, drilling, drilling out and deburring in a single work stage, suitable for use in hand and box column drills in
the fields of trade and industry, for sheet metal and plate metal, profiles and tubes manufactured from steel, brass,
copper, aluminium, V2A stainless steel, plastic, wood, etc. up to 3 mm in thickness. 12 mm ø receiver shaft.
Surfaces additionally coated with TiN (titanium nitrite) after hardening are extremely hard and smooth. Higher cutting
speed permits quicker working, lower wear increases the durability by between 5 and 10 fold!

Drilling ø mm
Drill
steps
HSS • • • •• • • • • 9 1 20 1201
HSS-TIN • • • •• • • • • 9 1 20 1206
HSS • • • •• • • • • •• 11 1 20 1200
HSS-TIN • • • •• • • • • •• 11 1 20 1205
HSS • • • • • • •• •• 10 1 20 1207
HSS-TIN • • • • • • •• •• 10 1 20 1208
HSS • • • • • • •• •• •• 12 1 20 1209
HSS-TIN • • • • • • •• •• •• 12 1 20 1210
Replacement centring drill

suitable for all CIMCO step drills
Shaft ø 6 mm 8 mm ø 1 20 1273
Shaft ø 4 mm (new generation) 8 mm ø 1 20 1274

40.5 through-hole for M 40
38.5 cored hole for M 40
37.0 through-hole for Pg 29
33.6
32.5 through-hole for M 32
30.5 cored hole for M 32
28.3 through-hole for Pg 21
25.8
25.5 through-hole for M 25
23.5 cored hole for M 25
22.5 through-hole for Pg 16
20.5 through-hole for M 20
20.4 through-hole for Pg 13.5
18.6 through-hole for Pg 11
18.5 cored hole for M 20
16.5 through-hole for M 16
15,2 through-hole for Pg 9
14.5 cored hole for M 16
12.5 through-hole for Pg 7/M12
8.0 centring drill bit

Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de