Page 178 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

176

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design Size/mm PU Article no.
Design Size/mm PU Article no.

1000 V Insulating floor mat
protective mats for electrical switch rooms, specific surface resistance approx. 1012 ohm/cm, dielectric strength
16.4 kV/mm (tested according to DIN VDE 0303 part 21), thus the 4-mm thick matt has a dielectric strength of 50 kV
(test voltage 5 kV/min according to DIN VDE 0680 part 1), made of green NR/SBR polymer plastic (hardness approx.
55° Shore A), tensile strength > 50 N/mm
2, elongation at rupture > 500%, embossed, grooved walking surfaces of course
material for increased stepping safety, abrasive wear < 300 mm
3, temperature resistance from –30 °C to +70 °C
1000 x 1000 x 4 mm 1 14 0224
10 m x 1 m x 4 mm 1 14 0225
Your personal safety set, 4-piece

in a practical and sturdy carrying bag 17 0110
Electrician helmet 14 0200
Electrician visor 14 0204
NH safety handle 14 0210
Electrician finger gloves 14 0214
1 14 0255
Your personal safety set, 5-piece

in a practical and sturdy carrying bag 17 0112
Electrician helmet 14 0200
Electrician visor 14 0204
NH safety handle 14 0210
Electrician finger gloves 14 0214
Insulated floor mat 14 0224
1 14 0250

Safety harness type A

for working in areas with risk of falling, e.g., towers, poles, building overhangs, safety harness with a back receiver
ring (according to DIN EN 361) two side attachment rings, (according to DIN EN 358), weight only 1.4 kg.
fits all body sizes 1 14 0455

Safety harness type B

like type A but with a chest loop as front receiver point for better work and two side attachment rings as well
as a comfortable 100 mm wide, padded back support, weight 1.5 kg.
fits all body sizes 1 14 0456

Guided fall arrester MAGIC

according to EN 353-2
The small and light fall arrester runs free in both directions. Available in various rope lengths of 12 mm
kernmantle rope.
10 m 1 14 0475
15 m 1 14 0476
Safety lanyard ERGOGRIP

according to EN 358
Safety lanyard for workstation positioning with ergonomically shaped operating element, length 1.5 m and one-hand
carabiner, 12 mm kernmantle rope. The rope is fixed to the attachment rings on the harness.
1 14 0490

Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de