Page 191 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 191
189
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Design Size mm PU Article no.
Design Size mm PU Article no.
Contact soldering paste
according to DIN EN 29454-1 1.1.2.C, for soldering in the fields of electrical engineering, electronics and electronic installa tion
50 g tin 1 15 0240
Desoldering pump
ideally suitable for repair work on circuit boards and electronic components, in professional industrial quality
with extremely high and constant suction power and large aluminium solder chamber, low weight (only 65 g),
with thin, anti-static Teflon desoldering tip.
195 1 15 0300
Electronic soldering devices
220 Volt, with plastic handle, 1.5 m power cable and “Schuko” safety plug, interchangeable copper soldering tips
Watt Tip temp. Heating time ~ Soldering tip ø mm
15 370 °C 1.5 min 5 straight 1 15 0448
Replacement soldering tip for 15 0448 1 15 0449
30 410 °C 1.5 min 5 straight 1 15 0600
Replacement soldering tip for 15 0600 1 15 0601
60 460 °C 2.0 min 7 bent 1 15 0453
Replacement soldering tip for 15 0453 1 15 0457
80 480 °C 2.5 min 7 bent 1 15 0602
Replacement soldering tip for 15 0602 1 15 0603
100 500 °C 2.5 min 7 bent 1 15 0456
Replacement soldering tip for 15 0456 1 15 0457
Tool holder for electrical and gas soldering irons
with tray for cleaning sponge
80 x 110 mm 1 15 0301
Electrical soldering gun
220 Volt, with soldering point light and Euro plug
Watt Tip temp. Heating time ~
100 400 °C 0.2 min 1 15 0700
Gas soldering set
10 piece, for lighter butane gas. For challenging soldering tasks without obstructive cables in all locations where power
supply is not available, e.g. in installation, service and repair areas. Also suitable for heat-shrinking work, micro-welding
and the cutting of plastic films and plates thanks to various interchangeable attachments. With electronic ignition, infinitely
variable output, temperatures up to 1,300 °C in the event of naked flames, soldering up to 500 °C,
heat-shrinking up to 500 °C, burning time approx. 60 min.
In handy shock-proof plastic storage and transport case complete with window. Set contains 1 unit each of:
- Gas soldering iron with protective safety cap and locking device
- Pencil tip soldering tip
- 3 mm single-sided, diagonal soldering tip (elliptical shape)
- 3.5 mm dual-sided, diagonal soldering tip (chisel shape)
- Hot knife with 12.5 mm blade width for the cutting and forming of plastic and rigid foams
- Heat reflector for heat-shrinking
- 3.5 mm ø flame nozzle for micro-welding
- 7 mm and 8 mm wrench for soldering tip assembly
- Cleaning sponge in 40 x 40 mm sponge container
- Comprehensive instruction manual
10 piece gas soldering iron set 275 x 160 x 45 mm 1 15 0800
Gas soldering iron individual device 235 x 27 mm 1 15 0810
Soldering station with infinitely variable control
primary voltage 230 V, 50/60 Hz, secondary voltage 12 V, safety transformer, LED function display,
soldering iron with separate potential equalisation and interchangeable soldering tip
Watt Tip temp. Heating time ~ Soldering tip ø mm
30 200 - 450 °C 1.5 min 5 1 15 0730
Replacement soldering iron
Watt Tip temp. Heating time ~ Soldering tip ø mm
30 200 - 450 °C 1.5 min 5 1 15 0732
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de
