Page 194 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 194
192
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Design Size mm PU Article no.
Design Size mm PU Article no.
WET.PROTECT
protects against wet and moisture-related short circuits, failure and corrosion, infiltrates the moisture
and subsequently forms a permanent protective film, obtains conductivity and increases the service life of the treated
parts, can be used as a preventative measure or directly following the effects of moisture as a means of repair.
For use in industry, trade and the domestic household
e.basic 50 ml 1 15 1140
e.basic 200 ml 1 15 1142
For use on motorbikes, trikes and mopeds
e.motorbike 50 ml 1 15 1144
For use on boats and yachts in saltwater environments
e.nautic 50 ml 1 15 1146
e.nautic 200 ml 1 15 1147
For use on passenger cars and heavy goods vehicles
e.car 50 ml 1 15 1148
Note: Due to the limited shelf-life, it is not possible to return the spray and cleaner cans.
Cartridge gun
for all standard cartridges (e.g. silicone), open skeleton structure, soft delivery stroke, extremely long service
life, with pressure release and spray nozzle opener
1 15 1270
Hot glue gun set
electronic temperature control, mechanical feed device for glue sticks, approx. melting temperature 120 °C, approx.
heating time 7 min., output 25 W, for 11 mm ø glue sticks. Supplied in a practical plastic case complete with 6 glue sticks.
1 18 1400
Corr. 11 mm ø glue sticks 200 mm in length 1 18 1401
Plaster and assembly cement
Supply to wholesale trade in Germany exclusively in full packaging units (= 1 pallet per article) and from
a minimum delivery amount of 5 t per shipment!
Building and electrician plaster
for the insertion of sockets, filling of holes, for improvement and installation work, dowelling, smoothening and fixing
in interior areas. Specially designed for building and electrical work. Also ideally suitable for forming and model-making work.
Approx. processing time of 15 – 20 minutes, approx. mixing ratio of 8 l water / 10 kg, approx. storage time of 6 months.
PU = 1 pallet
in paper sack 25 kg 24 sacks 14 0330
10 kg 60 sacks 14 0332
5 kg 120 sacks 14 0334
in plastic bucket 10 kg 44 buckets 14 0335
Fixing plaster
for the fixing of plasterboard, plaster fibre and plasterboard composite plates onto stable and absorbent sub-surfaces. Pre-
treat smooth concrete surfaces with Betokontakt and highly absorbent sub-surfaces with primer or absorbent substrates. The
guidelines provided by the construction panel manufacturer must be observed. Also suitable for the fixing of interior plaster
profiles. Approx. processing time: 50 minutes, approx. material consumption of 5 kg / m
2, approx. storage time: 6 months.
PU = 1 pallet
in paper sack 25 kg 40 sacks 14 0338
NEW
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de
