Page 259 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

257

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

UNDERWRITERS
LABORATORIES INC.

ISO EN 50146

GERMANISCHER
LLOYD

26

Design Size mm PU Article no.

Design Size mm PU Article no.

Cable ties

Raw material:
Pure polyamide 6.6 (PA 6.6, nylon) with no recycling material content, raw materials procured solely from leading
quality manufacturers, colours: natural or black (RAL 9011) by enrichment with carbon (carbon black).
Material properties:
Self-extinguishing according to UL 94-V2, melting point +260 °C, halogen-free, silicon-free, non-toxic, food-safe according
to recommendation “X” (10) BGA (German Health Authority), non-conductive, high abrasion resistance, low frictional
resistance, impact-resistant, recyclable. Black cable ties retain the moisture in the plastic, thus preventing embrittlement,
hardening and fragility. Black cable ties are thus suitable for outdoor application and weatherproof for at least two years.
Chemical resistance:
Resistant to (among others) oils, petroleum products (e.g. petrol, kerosine, fats and lubricants), hydrocarbons
(e.g. lower alcohols, acetone), cleaning agents and solvents, alkalis, mould, salt water. Conditionally resistant
among others, to strongly diluted acids. Non-resistant to, among others, phenols, oxidising chemicals, formic acid,
phosphoric acid, chlorine, chloric acid (e.g. hydrochloric acid, butanoic acid), benzoic acid, mineral acids.
Processing conditions and conditions of use:
Installation temperature (during installation) –10 °C to +80 °C, continuous service temperature (following installation)
–40 °C to +105 °C, possible changes in length depending on temperature (between –20 °C and +100 °C) maximum
+/- 1.5 %, depending on relative air humidity (between 25 % and 100 %) maximum +/- 3 %, no changes in length
due to ageing if cable ties are not under load.
Important when storing cable ties:
Before use, store cable ties in the sealed packaging, to prevent drying out in a cool,
not exceedingly dry place, away from sources of heat. Naturally coloured cable ties can turn yellow
after an extended period of time due to temperature-dependent oxidation.
This will not affect performance properties.
Packaging:
Packaged in synthetic transparent foil, 100 % recyclable, vacuum sealed.
Authorisations and certifications of quality:
Products comply with ISO EN 50146, the IEC Standard IEC 92-101, flame retardant according to UL 94-V2,
“Yellow Card” certification from Underwriters Laboratories Inc., self-extinguishing in accordance with UL 94,
flame class 94V-2, self-extinguishing in accordance with ISO 1210, flame class FV-2, minimum retention strength
in accordance with MIL-S-23190 E standard.
natural colour
Width Length Cable harness Minimal tensile strength
mm mm ø mm kp N .
2.5 75 2 - 16 9 88 100 18 1360
100 2 - 24 100 18 1361
135 2 - 35 100 18 1362
160 2 - 42 100 18 1402
200 2 - 55 100 18 1363
3,5 140 2,5 - 36 18 176 100 18 1364
200 2.5 - 55 100 18 1404
280 2.5 - 80 100 18 1378
4.5 160 2.5 - 40 22 216 100 18 1365
180 3 - 45 100 18 1366
200 3 - 51 100 18 1367
250 5 - 70 100 18 1379
280 5 - 76 100 18 1368
360 5 - 101 100 18 1369
380 5 - 110 100 18 1408
7.5 180 5 - 46 60 588 100 18 1371
240 5 - 64 100 18 1372
280 5 - 76 100 18 1377
360 5 - 101 100 18 1373
450 18 - 132 100 18 1374
540 20 - 160 100 18 1375
750 32 - 222 100 18 1376
9.0 780 20 - 235 80 784 100 18 1390
920 40 - 280 50 18 1391
1220 50 - 375 50 18 1394
12.5 500 10 - 140 110 1080 50 18 1392
750 40 - 225 50 18 1393
1000 40 - 300 50 18 1395
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de