Page 283 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

281

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design/colour Width/mm Length/m PU Article no.

Design/colour Width/mm Length/m PU Article no.

Double-sided adhesive foam tape

Description:
Closed-cell polyethylene foam, coated on both sides with acrylic-based adhesive, comes with separating paper.
Special features:
Excellent resistance to pressure, easy to shape, very good resistance to UV, aging, moisture, oils,
solvents and softeners, powerful immediate adhesion.
Typical areas of use:
Many different uses in assembly, even for vertical heavy load assemblies indoors and outdoors, instead of riveting,
screwing and liquid adhesives, good adhesion including to non-elastic materials with irregular, rough surfaces
(wood, masonry, concrete, paint): on wall mounting for cable routing ducts, cable clamps, switch cabinets,
attaching labels, displays and notices, including those made of and attached to plastic, impact-resistant and
vibration-cushioned soft bedding of components (e. g. PCBs, control panels, controls and instruments), effective
reduction of sound transmission (rattle suppression), form-fitting seals against dust, water, vapour, wind and light,
also for closing air outlets to save energy.
white 15 33 20 16 2861
19 33 16 16 2862
25 33 12 16 2863
Paper masking tape

Low crepe paper masking tape, 0.16 mm. thick. Medium adhesion thanks to rubber-based adhesive.
Suitable for indoor use.
Special features:
High tear resistance to approx. 114 N / 25 mm and medium adhesion of 6.2 N / 25 mm. Temperature resistant
up to max. 85 °C for 1 hour. The crepe allows it to adapt very well to different substrates and radii.
Typical areas of use:
Masking of areas to be blocked when painting and varnishing.
beige 19 50 1 16 0302
25 50 1 16 0304
38 50 1 16 0306
50 50 1 16 0308
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de