Page 76 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

74

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design Size mm PU Article no.
Design Size mm PU Article no.

Voltage and continuity tester ALPHA
voltage testing 12 V to 690 V AC/DC, automatic AC/DC recognition, automatic polarity display,
Testing current < 3.5 mA, integral unipolar phase testing to determine the phase also without counter-potential, acoustic
signal and particularly bright LED bar display (+ 12 V, - 12 V, 24 V, 50 V, 120 V, 230 V, 400 V, 690 V, single pole, continuity),
voltage display even without or with discharged batteries, continuity test with visual display and acoustic signal, resistance
range 0 to 400 kΩ, patented double-pole phase rotation indicator (100 to 690 V), battery testing function, integral test
point lighting, loss-proof probe point protector, broad anti-slip guard, quick one-handed test for mains sockets using fixed
19 mm contact gap, power supply 2 batteries 1.5 V IEC LR603
1 11 1420
Voltage and continuity tester DUSPOL EXPERT

display of direct and alternating voltage 12 - 690 V (LED), display stages: 12, 24, 50, 120, 230, 400,
690 V / 750 V DC, additional vibrating alarm for voltage recognition, continuity test 0 - 108 kΩ (buzzer and LED),
phase rotation / phase testing (LCD), polarity testing (LED), load connection via push-button: IC ≤ 200 mA, with
precision lighting of dark testing points, type of protection IP 64 (dustproof / splash protected), tested and certified in
accordance with IEC 61243-3, VDE 0682 part 401, overvoltage category CAT IV 500 V,
includes 2 x 1.5 V micro-batteries (LR03 / AAA)
1 11 1433
Voltage tester DUSPOL ANALOG PLUS

display of direct and alternating voltage from 12 - 690 V (7-stage LED / plunger coil), display stages:
12, 24, 50, 120, 230, 400, 500, 690 V AC / 750 V DC, additional vibrating alarm for voltage recognition, phase
rotation / phase testing (LCD), polarity testing (LED), deliberate tripping of the ground fault circuit interrupter
(IC ≤ 250 mA), type of protection IP 64 (dustproof / splash protected), tested and certified in accordance with
IEC 61243-3, VDE 0682-401, overvoltage category CAT IV 500 V
1 11 1430
Voltage and continuity tester DUSPOL digital LC

illuminated 3-digit LCD and 7-stage LED display for direct and alternating voltage from 6 - 690 V, continuous voltage
display: 6 V – 690 V AC / 750 V DC (LCD), display stages: 12, 24, 50, 120, 230, 400, 690 V AC / 750 V DC (LED),
additional vibration alarm for voltage recognition, acoustic / visual continuity test (buzzer / LCD), phase rotation /
phase test (LCD), polarity test (LCD), deliberate tripping of ground fault circuit interrupter (IC ≤ 250 mA),
illumination of test points, type of protection IP 64 (dustproof / splash protected), tested and certified according to
IEC 61243-3, VDE 0682-401, overvoltage category CAT IV 500 V, III 690 V, including 2 x 1.5 V micro-batteries
(LR03/ AAA)
1 11 1427
Voltage and continuity tester DUSPOL COMBI

display of direct and alternating voltage from 12 - 690 V (LED), display stages: 12, 24, 50, 120, 230, 400,
690 V / 750 V DC, additional vibration alarm for voltage recognition, continuity and semiconductor test
0 - 600 kΩ (LCD), polarity test (LED), load connection via push-button: IC ≤ 200 mA, type of protection IP 64
(dustproof / splash protected), tested and certified according to IEC 61243-3, VDE 0682 Part 401,
overvoltage category CAT IV 500 V.
1 11 1428
Safety voltage tester PROFIPOL

with polarity display, phase display against protective earth, for direct and alternating current from 6 - 400 V on LED,
diode display (LED) +/- 6 V, 12 V, 50 V, 120 V, 230 V, 400 V, polarity display on LED, power input 30 mA, type of
protection IP 65 (dust/waterproof), approved for indoor and outdoor use, tested and certified in accordance with
IEC 61243-3, VDE 0682 Part 401
1 11 1425
Continuity and circuit tester DUTEST

with additional torch function (permanent light) and two-stage range indicator: 0 - 900 Ω/0 - 90 kΩ by LED and
buzzer, visually by diode display (LED), acoustically by buzzer, low-resistance measuring range: 0 - 900 Ω,
high-resistance measuring range: 0 - 90 k Ω, with external voltage protection, type of protection IP 40,
tested and approved in accordance with VDE 0403
1 11 1435
Continuity tester

for resistance, semiconductor, polarity and capacitor testing (0.01 to 1000 μF), with acoustic signal and visual
display with resistance-dependent tone pitch, resistance range 0 bis 500 k Ω, testing current approx. 2.2 mA, external
voltage display > 50 V, electric strength up to 600 V, power supply 1 battery 9 V IEC 6LR61, weight 230 g
100 x 50 x 25 1 11 1400
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de