Page 77 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

75

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design Size mm PU Article no.

Design Size mm PU Article no.

Digital pocket multimeter

in credit card format, with a wide range of measurements and a high degree of accuracy: automatic choice of
measurement range, direct current and alternating voltage measurements up to 400 mV / 4 V / 40 V / 400 V / 600 V
respectively, frequency measurements up to 10 Hz / 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz / 10 MHz, resistance
measurement up to 400 Ω / 4 kΩ / 40 kΩ / 400 kΩ / 4 MΩ / 40 MΩ, relative function for measurement by comparison,
diode, capacitance and continuity tests, display on large LCD (max. 3999), data hold button for easier reading, continuity
test with acoustic signal, automatic switch-off about 15 minutes after last operation (energy saving function),
overload protection 3700 V AC, weight only 70 g including batteries, supplied with 2 LR44 batteries (1.5 volt),
1 set of integral test leads plus folder for carrying and protection.
107 x 54 x 10 1 11 1402
Digital multimeter

compact multimeter with a wide range of measurements and a high degree of precision: direct, automatic or manual
measurement of direct and alternating current, up to 400 mV / 4 V / 40 V / 400 V / 600 V, 400 μA / 4000 μA /
40 mA / 400 mA / 4 A / 10 A respectively, frequency measurement up to 5.12 Hz / 51.2 Hz / 512 Hz / 5.12 kHz /
51.2 kHz / 512 kHz / 5.12 MHz / 10 MHz, resistance measurement up to 400 Ω / 4 kΩ / 40 kΩ / 400 kΩ / 4 MΩ /
40 MΩ, relative function for testing by comparison, diode, capacitance and continuity tests, display on large LCD
(max. 3999), data hold button for easier reading, continuity test with acoustic signal, display of charge condition, automatic
switch-off about 30 minutes after last use (energy saving function), overload protection 3700 V AC for 1 minute,
weight only 260 g including batteries, supplied with 2 R6P batteries (1.5 volt), 1 fuse 0.5 A / 250 V
and 1 fuse 10 A / 250 V, 1 set of test leads plus rubber protective case.
155 x 75 x 33 1 11 1404
Clip-on adapter

can be used in combination with any digital multimeter with a range of 200 mV/2 V alternating current to carry out
current measuring. Connects directly to the 4 mm input socket of the multimeter. Measurement range: 0 A to 300 A
at 1.5% +- 2 A, conversion 1 A AC corresponds to 1 mV, operating temperature: 0 °C bis 50 °C, width of opening
max. 28 mm
1 11 1414
Clip-on measuring instrument

small measuring instrument for one-handed operation, pincer opening 30 mm, measurement range for alternating current up to 40 A/400 A,
alternating voltage up to 600 V, direct voltage up to 400 V/600 V, resistance up to 400 Ω / 4000 Ω, precision of measurement
+/- 2 %, LC-display (max. 3999), data hold button for easier reading, continuity test with acoustic signal, charge condition display,
automatic switch-off after about 10 minutes without operation (energy saving function), overload protection 480 A AC/720 V AC,
weight only 250 g including batteries, delivery includes 2 R03 batteries (1.5 volt) and 1 set of test leads.
184 x 44 x 27 1 11 1413
Digital clip-on measuring instrument AC / DC

small, easy to handle clip-on measuring instrument for one-handed operation, pincer opening width 30 mm, display on large LCD
(digits max. 4199), data hold button for easier reading, battery charge condition is displayed, current consumption approx. 15 mA,
automatic switch-off about 10 minutes after last operation (energy saving function, only 35 μA current consumption to conserve the
battery), overload protection for 10 seconds AC/DC 480 A or respectively 720 V with display on the LCD,
complies with IEC 61 010-1 CAT. III 300 V.
Two self-setting measurement ranges for
Alternating current AC: up to 40 A (+/- 3%) and up to 400 A (+/- 4 %), frequency range 50/60 Hz,
Direct current DC: up to 40 A (+/- 3 %) and up to 400 A (+/- 4 %),
Alternating voltage AC: up to 400 V (+/- 2 %) and up to 600 V (+/- 2 %), frequency range 50/60 Hz,
Direct voltage DC: up to 400 V (+/- 1,5 %) and up to 600 V (+/- 1,5 %),
Resistance: up to 400 Ω and up to 4000 Ω (+/- 2 %)
Continuity test: with acoustic signal at 50 Ω +/- 35 Ω.
Weight only 200 g including batteries, supplied with 2 R03 batteries (1.5 volt DC), 1 set of test leads and operating instructi ons.
187 x 68 x 38 1 11 1415
Test leads

both ends with 4 mm safety technology in accordance with DIN VDE 0411/EN 61010/IEC 61010, one end straight, one
end angled. PVC insulated highly flexible 0.8 mm test lead, current rating up to 16 A, measuring circuit category
CAT III / 1000 volt, length 1 m
red 1 11 1470
black 1 11 1471
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de