Page 92 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 92
90
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Design Size mm PU Article no.
Design Size mm PU Article no.
Service sets for KABELJET and pipe eel
each consisting of 2 end sleeves, 1 connecting sleeve and 20 g bottle of special adhesive. Weight approx. 150 g
for Cablejet with a 7.2 mm bar diameter 1 14 2160
for pipe eel with a 9 mm bar diameter 1 14 2161
for pipe eel with a 11 mm bar diameter 1 14 2162
Further accessories such as the twist compensation pin as well as pipe cleaning and duct brushes or gathering
devices can be delivered upon request.
Cable pulling socks manufactured from galvanised steel wire
for underground cabling, with 1 crimped wire loop
for cable ø mm
10 - 20 1 14 2506
20 - 30 1 14 2507
30 - 40 1 14 2508
40 - 50 1 14 2509
50 - 65 1 14 2510
65 - 80 1 14 2511
for underground cabling, with 2 crimped rope loops
for cable ø mm
10 - 20 1 14 2520
20 - 30 1 14 2521
30 - 40 1 14 2522
40 - 50 1 14 2523
50 - 65 1 14 2524
Cable pulling socks special designs
special cable pulling socks for particular applications such as those listed below can be delivered at short notice:
- Larger dimensions
- Cable pulling socks with lateral loop
- Separated cable pulling socks
- Multiple draw grips, e.g. for the simultaneous pulling of triple conductor power cables into
a shared protective pipe
- Kevlar-reinforced plastic pulling socks (non-conducting, anti-magnetic)
- Multi-level, highly-flexible cable pulling socks for optical fibre lines
- Pulling socks for overhead line construction
- Cable pulling socks manufactured from stainless steel strands
Please request the desired cable pulling socks.
Rope and cable connection socks
for the quick creation of a stable connection between two cables or ropes. They are used where existing cables
or rope are to be replaced by new ones, e.g. the exchange of aged underground cables, introduction of new ropes
in cranes. Hand-woven from galvanised steel wire strands, average effective braided length 1200 mm.
Cable ø Practical Max. laying
mm breaking load tensile force
8 – 16 15 kN 7.5 kN 1 14 2301
10 – 20 19 kN 9.4 kN 1 14 2302
20 – 30 55 kN 27.4 kN 1 14 2303
30 – 40 55 kN 27.4 kN 1 14 2304
Cable and rope guidance products
a comprehensive assortment of laying tools for cable or rope guidance in ditches and shafts (e.g. deflection and
corner pulleys, cable protection and shaft guidance curves, cable introduction bushes) can be delivered at short notice.
Please enquire.
Shaft cover lifter
manufactured from galvanised steel, weight 0.6 kg
320 mm x 155 mm 1 14 2300
Special KATIGRIP handle
for the quick and simple pulling of all pulling wires measuring between 3 and 11 mm in ø
(flat steel, helical wire, plastic and glass fibre wires)
1 14 2190
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de
