Page 97 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 97
95
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
One-hand ratchet cable cutter
for crush-free cutting of cables with a maximum external diameter of 45 mm. Suitable for copper and aluminium
cables, not suitable for steel cables, steel reinforced cables and hard-drawn copper conductors. Clean
cutting thanks to sharp, specially hardened blades, non-tiring, one-handed use possible despite compact shape, thanks
to ratchet mechanism with needle bearing eccentric transmission and ergonomic handles with narrow opening width.
However, the handles are long enough to allow the second hand to be used in support for peak stress. Weight only 980 g.
Mobile, fully swivelling blade that can be released in any position, easy to exchange (replacement swivelling blade CIMCO
article no. 12 9168), handles can be locked with a turning knob (lock symbol), small opening of the cutting blades with
lockable safety catch.
Max. cutting performance
Cu (copper) Max. ø 45 mm
Multi-wire 300 mm
2 / 600 MCM
Sector-shaped conductor 3 x 70 SM
Al (aluminium) Max. ø 45 mm
Multi-wire 400 mm
2 / 800 MCM
Sector-shaped conductor 4 x 70 SE
1 12 0168
Replacement swivel blade 1 12 9168
Ratchet cable cutter for steel cables
• With ratchet action
• Two-handed operation thanks to optimum leverage and step-by-step cutting
• Suitable for cutting:
- Flexible steel cables up to 18 mm diameter
- Stainless and high density steel cables up to 14 mm diameter
for cable ø
18 mm 430 mm 1 12 0140
Hand-hydraulic cutting tools
Hydraulic hand cable cutter up to 45 mm diameter
suitable for cutting aluminium and copper cables, and also aluminium-steel cables up to 45 mm diameter.
Features:
Lightweight, compact design, cutting head with snap closure and blade guide, can be rotated 270°
Quick advance thanks to double piston hydraulics, integral pressure limit
Delivery:
Basic unit in plastic case
Cutting area Cutting force Operating pressure
max. 45 mm ø 60 kN 700 bar (70MPa) 1 10 5506
Hydraulic hand cable cutter up to 50 mm diameter
suitable for cutting aluminium and copper cables up to a diameter of 50 mm.
Features:
Lightweight, compact design, cutting head with snap closure and blade guide, can be rotated 270°
Quick advance thanks to double piston hydraulics, integral pressure limit
Delivery:
Basic unit in plastic case
Cutting area Cutting force Operating pressure
max. 50 mm ø 60 kN 700 bar (70MPa) 1 10 5508
Hydraulic hand cable cutter up to 85 mm diameter
suitable for cutting aluminium and copper cables up to a diameter of 85 mm.
Features:
Lightweight, compact design, cutting head with snap closure and blade guide, can be rotated 270°,
Quick advance thanks to double piston hydraulics, integral pressure limit
Delivery:
Basic unit in plastic case
Cutting area Cutting force Operating pressure
max. 85 mm ø 70 kN 700 bar (70MPa) 1 10 5510
NEW
Design Size mm PU Article no.
Design Size mm PU Article no.
Advice and ordering: Phone: +49 (0)2191 3718 01, Fax: +49 (0)2191 3718 85, E-mail: info@cimco.de
