Page 99 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

97

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Design Size mm PU Article no.
Design Size mm PU Article no.

Electrician scissor

Blades in stainless VA steel-vanadium-molybdenum alloy, one cutting edge finely serrated, glass fibre reinforced impact-
proof 2-component plastic handles, total length 140 mm, cutting length 47 mm. For cutting and stripping insulation
off conductors and cables up to 22 mm in diameter, for cutting insulating tape, cable ties and other materials.
140 1 12 0130
Telephone scissors

with wire cutter, bright nickel plated
with smooth cutting edge 130 1 12 0220
with serrated cutting edge 130 1 12 0222
Crown scissor

bright nickel plated, with serrated cutting edge, for the thinnest wires
115 12 12 0230
Universal scissor (paper, wallpaper and household scissor)
stainless steel blades, modern 2-component technology, ergonomically shaped handles with soft rubber inset
220 1 12 0128
Cable scissors for fibre optic cables

especially for kevlar and aramid fibres
with ceramic cutting edges 145 1 12 0250
Blades in high-alloy, stainless steel, hardness scale HRC 60 to 62, cutting edge hardness scale HK 1200, one cutting
edge micro-serrated, adjustable screw hinge, ergonomic plastic handles, suitable for left and right-hand use,
cutting length 42 mm.
160 1 12 0252
Multi-purpose shear for plastics

Practical set, consisting of quality shear and 5 exchangeable cutting insets, in impact-proof, easy to handle plastic
box, essential for almost all craft work in electrical and sanitary installation.
Contains: Multi-purpose shearfor quick, non-crushing cutting work on plastic, rubber and wooden parts and on ribbon
cables (except for hard metals), solid precision cutting blade (cutting length 57 mm) in case-hardened tool steel
(> 52 HRC), resharpenable, special cutting geometry for very light cut, eccentrically placed pivot point for oblique
shearing to do away with tedious deburring, with opening spring and locking device, ergonomically shaped plastic
handles with slip guard. 5 different cutting insets in lightweight metal, can be changed in seconds:
flat-straight inset(pre-mounted in the shear) for general cutting work with flat materials such as plastic profiles,
ribbon cables, cable ducts, flooring strips etc., mitre inset with stop angle and markings for angle cuts at
45° - 60° - 75° - 90° - 105° - 120°, profile inset at 90°for cutting box profiles up to 25 x 45 mm, e. g. small cable
and wiring ducts, and also for hard or thick-walled plastic pipes and hoses up to 25 mm diameter, round profile inset
16 / 19 mmeach with one circular guide 16 mm ( 5/8”)- and one 19 mm (3/4”) diameter respectively, plus round profile inset 25 mm
with a circular guide 25 mm (1”) diameter, ideal for burr-free cutting of flexible and hard plastic pipes and hoses.
1 12 0210
Replacement parts:
Flat-straight 1 12 0211
Mitre inset 1 12 0212
Round profile 16/19 mm diameter 1 12 0213
Round profile 25 mm diameter 1 12 0214
Profile inset 90° 1 12 0215
Replacement blade 1 12 0216
Multi-purpose shear for plastic pipes and hoses

Shear as no. 12 0210, with pre-mounted cutting inset no. 12 0213, for cutting round profiles with a
diameter of 16 mm ( 5/8”) and 19 mm ( 3/4”), in particular hard and flexible plastic pipes (corrugated pipes).
1 12 0290

Plastic shear with adjustable stop

Shear as in the range (article no. 12 0210), but with adjustable stop angle for convenient mitre cuts,
locking positions at 45°, 60°, 75°, 90°, 105°, 120° and 135°, 2-component handles.
1 12 0208
Advice and ordering: Phone: +49 (0)2191 3718 01, Fax: +49 (0)2191 3718 85, E-mail: info@cimco.de