Page 292 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 292
290
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Weights
1 ounce 28.349 g
1 pound (lb) 0.454 kg
1 engl. ton 1.016 t
1 am. ton 0.907 t
1 kp 10 Newton
Units of length
1 inch 25.4 mm
1 foot 0.3048 m
1 yard 0.914 m
1 mile 1.609 km
Classification of Cimco screwing tools according to thread ø mm
Pozidriv crosshead Phillips crosshead Torx
Thread Tool Thread Tool Thread Thread
ø mm receptacle ø mm receptacle ø mm receptacle
2.5 - 3.0 Size 1 2.0 - 3.0 Size 0 3.0 - 3.5 T 10
3.5 - 5.0 Size 2 2.5 - 3.0 Size 1 4.0 - 4.5 T 20
6.0 Size 3 3.5 - 4.8 Size 2 5.0 - 6.0 T 25
5.5 - 7.0 Size 3
Woodscrews DIN 96 Cylinder head screws DIN 84 Machine hex screws DIN
Thread Tool Thread Tool Thread Tool Thread Tool
ø mm receptacle ø mm receptacle ø mm receptacle ø mm receptacle
3 6.0 x 0.8 M 3 5.5 x 0.8 2.5 Size 5 12.0 Size 19
3.5 7.0 x 0.8 M 4 7.0 x 1.2 3.0 Size 5.5 14.0 Size 22
4 8.0 x 1.0 M 5 8.5 x 1.2 4.0 Size 7 16.0 Size 24
4.5 9.0 x 1.0 M 6 10.0 x 1.6 5.0 Size 8 20.0 Size 30
5 10.0 x 1.2 M 8 13.0 x 2.0 6.0 Size 10 24.0 Size 36
6 12.0 x 1.6 8.0 Size 13 30.0 Size 46
10.0 Size 17
Technical appendix
Safety tools
Insulated safety tools and insulated protective equipment have been developed for use during work on live parts. Their use shou ld not, however, be a “blank cheque” for the user;
rather applicable regulations (including accident prevention regulations, VBG, DIN, VDE and others) must always be observed and followed. Upon request we will gladly send you
specifics and additional informational material.
Insulated hand tools, tested and VDE-certified Insulated hand tools tested according 1000 V according to European standard EN 60900 or 1000 V to European standard EN 60900 or
VDE specification 0682, part 201. Valid from 01.01.2005. VDE specification 0682, part 201.
Circlip pliers
Shape Size mm Shape Size mm Shape Size mm Shape Size mm
for circlips for circlips for circlips for circlips
A 3 3 - 10 B 3 3 - 10 C 3 3 - 10 D 3 3 - 10
A 10 10 - 25 B 10 10 - 25 C 10 10 - 25 D 10 10 - 25
A 19 19 - 60 B 19 19 - 60 C 19 19 - 60 D 19 19 - 60
A 40 40 - 100 B 40 40 - 100 C 40 40 - 100 D 40 40 - 100
A 85 85 - 165 B 85 85 - 165 C 85 85 - 165 D 85 85 - 165
Shape A and B for external circlips Shape C and D for internal circlips
Parameters for installing straddling dowels
Dowel ø mm Dowel length mm Hole depth mm Drill ø mm Screw ø mm
5 25 35 5 2.5 - 4
6 30 40 6 3.5 - 5
8 40 55 8 4.5 - 6
10 50 70 10 6 - 8
12 60 75 12 8 - 10
14 70 85 14 10 - 12
16 80 95 16 12 - 14
20 90 110 20 16
Description of the symbols
Functional description of the wire strippers
- Set the adjusting screw to the desired conductor cross section to be stripped by turning it (left / right).
- Secure the adjusting screw using the counter nut.
- Insert the cable.
- Close the pliers by pressing them and remove the plastic sheathing.
Energised
work
Cutting edge
hardness in HRC
With cutting
bevel
Single joint Flat nose pliers Wire type
soft
Wire type
piano
VDE/GS
tested
Grip surfaces
serrated
With slight
cutting bevel
Lap joint Flat-round
pliers
Wire type
medium-hard
Wire type
rope
Grip surfaces
diagonally serrated
Box joint Round nose
pliers
Wire type
hard
Wire type
Cu cable
Advice and ordering: Phone: +49 (0)2191 3718 01, Fax: +49 (0)2191 3718 85, E-mail: info@cimco.de
