Page 64 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

62

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Blade size (W x H x L mm) Total length mm PU Article no.

Blade size (W x H x L mm) Total length mm PU Article no.

BITFLEX bits

The damping zone (only for bits in 25 mm length) between drive and working tip minimises the excessive power peaks which previo usly lead to high wear
and destructive ejection forces. The FLEX-Zone significantly increases the service life of the BITFLEX in comparison with conve ntional standard bits. All bits
with 1/4“ hex drive,
STANDARD

according to DIN 3128, single bits for Phillips crosshead screws
PH 1 25 1 11 4511
PH 1 90 1 11 4508
PH 2 25 1 11 4512
PH 2 90 1 11 4509
PH 3 25 1 11 4513
PH 3 90 1 11 4510
Single bits for Pozidriv crosshead screws
PZ 1 25 1 11 4515
PZ 1 90 1 11 4518
PZ 2 25 1 11 4516
PZ 2 90 1 11 4519
PZ 3 25 1 11 4517
PZ 3 90 1 11 4520
Single bits for slot-head screws, without FLEX-Zone
4.0 x 0.5 25 1 11 4551
5.5 x 0.8 25 1 11 4555
6.5 x 1.2 25 1 11 4559
Single bits for TORX® screws with bore (tamper resistant), without FLEX-Zone
T 10 25 1 11 4970
T 10 90 1 11 4573
T 15 25 1 11 4971
T 15 90 1 11 4574
T 20 25 1 11 4972
T 20 90 1 11 4575
T 25 25 1 11 4973
T 25 90 1 11 4576
Module bits

for combined slot-head/cross-head screws in electrical equipment, i.e. terminal blocks
PZ 1 70 1 11 4941
PZ 2 70 1 11 4942
TIN

TIN, this is the abbreviation for titanium nitrite. This special coating provides an additional tool life improvement to
the already excellent values of BITFLEX.
Single bits for Phillips crosshead screws
PH 1 25 1 11 4521
PH 2 25 1 11 4522
PH 3 25 1 11 4523
Single bits for Pozidriv crosshead screws
PZ 1 25 1 11 4525
PZ 2 25 1 11 4526
PZ 3 25 1 11 4527
Magnetic bit holder

according to DIN 3126, for 1/4“ bit drive; with permanent magnet
60 1 11 4505

Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de