Page 68 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie
P. 68
66
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Blade size (W x H x L mm) Total length mm PU Article no.
Blade size (W x H x L mm) Total length mm PU Article no.
Bit and socket wrench set, 28-piece
in attractive, compact, two-coloured plastic box, sockets and drive ratchet made of chrome vanadium
steel, specially hardened, high-gloss polished and hard chrome-plated.
Contains one of each of the following:
Twelve-point sockets with 1/4“ square drive: 4 – 4.5 – 5 – 5.5 – 6 – 7 – 8 – 9 – 10 – 11 – 12 – 13 – 14 mm
Mini ratchet with reverser and quick release 1/4“ square drive,
Screw bits of S2 special steel, 25 mm long; one bit each
for slot-head screws 4 – 5 – 6 mm
for Phillips cross-head screws PH 1 – PH 2 – PH 3
for Pozidriv cross-head screws PZ 1 – PZ 2 – PZ 3
for hex socket (Allen) screws 4 – 5 – 6 mm
Bit holder with quick release, 55 mm long, for manual and machine operation
Adapter from 1/4“ square drive (i.e. for ratchet) to 1/4“ hex drive (i.e. for screw bit), 25 mm long
1 11 3154
Ratchet-ring and open-end spanner set, 12-piece
Spanner sizes in set: 8 – 9 – 10 – 11 – 12 – 13 – 14 – 15 – 16 - 17 – 18 - 19 mm (order no. 11 2508 to 11 2519),
delivered in a robust, roomy roll-up tool bag.
1 11 2505
Ratchet-ring and open-end spanner set, 16-piece
made of chrome vanadium steel, highly polished and chrome-plated, ratchet with fine gearing (72 teeth = only 5° pivoting
angle), ideally suited for work in constricted working areas.
Contents:
Open-ended and ratchet-ring spanners (size 10, 11, 13 and 17), bits for Phillips / Pozidriv cross-head screws
PH 1 - PH 2 - PZ 1 - PZ 2 bits for slot-head screws 4 - 5.5 - 6.5 mm widths, bits for hex socket screws 5 - 6 mm,
10 mm bit adapter, 1/4“ square adapter
1 11 2434
Ratchet-ring and open-end spanners
for loosening or quickly tightening screws and nuts in one go with ratchet mechanism without having to reposition the ring-ratc het.
On one side open-end spanner with 15° offset, on the other side a ring spanner of the same size with integrated ratchet mechani sm with
distinct advantages: Ratchet with fine gearing: 72 teeth = only 5° minimum pivoting angle. Switch from clockwise and counterclo ckwise rotation
by simply turning over the spanner rather than by switching a lever, often in the wrong direction.
The spanners have very narrow dimensions in spite of ratchet. Thus the tools are especially suitable for constricted working sp aces.
12-point ring with flank drive, i.e., the drive does not take place over the edges of the screw head but on the flanks, whereby a fundamentally
higher power transmission is achieved and the edges of the screw heads and nuts are spared.
Made of chrome vanadium steel, drop-forged, specially hardened, high-gloss polished, nickel-plated and hard-chrome plated.
Very high torque transmission, the requirements of DIN are exceeded.
Spanner widths
8 mm 1 11 2508
9 mm 1 11 2509
10 mm 1 11 2510
11 mm 1 11 2511
12 mm 1 11 2512
13 mm 1 11 2513
14 mm 1 11 2514
15 mm 1 11 2515
16 mm 1 11 2516
17 mm 1 11 2517
18 mm 1 11 2518
19 mm 1 11 2519
Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de
