Page 66 - CIMCO - Outillage pour Professionnels - Electriciens - Industrie

64

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Blade size (W x H x L mm) Total length mm PU Article no.

Blade size (W x H x L mm) Total length mm PU Article no.

Bit set SPEZIAL, 33-piece

Bit set for loosening safety screws. Contains one each of: magnetic holder 60 mm for 1/4“ bit drive
TORX
® bits with bore (tamper resistant) T 8 - T 10 - T 15 - T 20 - T 25 - T 27 - T 30 - T 35 - T 40
Hex bits with bore (tamper resistant) 2 - 2.5 - 3 - 4 - 5 - 6 mm,
5/64“ - 3/32“ - 7/64“ - 1/8“ - 9/64“ - 9/32“
Slot bits with recess (spanner) 4 - 6 - 8 - 10 mm
Tri-wing bits TW 1 - TW 2 - TW 3 - TW 4
Torq-set bits TS 6 - TS 8 - TS 10 mm
1 11 4599
Screwdriver

including 6 bits, with 125 mm long, rigid shaft and magnetic holder. Sliding bit holder integrated into handle for 6 bits:
for slot-head screws 5.5 x 0.8 - 6.5 x 1.2
for Phillips crosshead screws PH 1 + PH 2
for Pozidriv crosshead screws PZ 1 + PZ 2
1 11 4580
“Long safety bits” set, 50-piece

for working with screws of all types, especially safety screws and special screws. Thanks to extended length of 75 mm excellent
for working in less accessible places in cramped conditions, with standard hex receiver 1/4“ for cordless screwdriver and manual
operation, made of chrome vanadium steel, stored neatly and securely in a shock-resistant plastic case (195 x 135 x 38 mm).
Contains one each of the following screw bits:
universal bit holder, with 1/4“ hex receiver and permanent magnet, length 60 mm
1 11 4606
Hex key set, 9-piece

with key sizes 1.5 – 2 – 2.5 – 3 – 4 – 5 – 6 – 8 – 10 mm, with extra long blade with ball end, made of fully hardened
S2 special steel, polished, hard chrome-plated surface, rounded edges, in a practical plastic holder for adding to a tool
bag or for mounting on the wall
1 11 0604
T-handle screwdriver set, 8-piece

for applying significantly more power than with conventional screwdrivers. With double-sided drive for hex socket
screws (Allen screws). Voluminous edge-free handle with 2-component design and soft rubber insert, blades made of
highly tempered S2 special steel, chrome-plated, with ball end on the longer blade, black glazed, including practical storage
stand for positioning on the work bench or for mounting on the wall.
One key each of 2 – 2.5 – 3 – 4 – 5 – 6 – 8 – 10 mm
1 11 0520

Slot 4 mm – 5 mm – 6 mm
Slot with recess (Spanner)
4 mm – 6 mm – 8 mm – 10 mm
Phillips crosshead PH 1 – PH 2
Pozidriv crosshead PZ 1 – PZ 2
Square socket (Robertson) size 1 – size 2
Hex socket (Allen) 4 mm – 5 mm – 6 mm
Hex socket (Allen) with bore (tamper resistant)
2 mm – 2.5 mm – 3 mm - 4 mm –5 mm – 6 mm

TORX
® T 10 – T 15 – T 20 – T 25 – T 30
TORX
® with bore (tamper resistant)
T 8 TR – T 10 TR – T 15 TR – T 20 TR – T 25 TR
T 27 TR – T 30 TR – T 35 – T 40 TR
TORQ-SET TS 6 – TS 8 – TS 10
TRI-WING
TW 1 – TW 2 – TW 3 – TW 4
CLUTCH
C 1 – C 2 – C 3
XZN polygon size 5 – size 6 – size 8

Advice and ordering: Phone: +49 (0)21 91 37 18 01, Fax: +49 (0)21 91 37 18 85, E-mail: info@cimco.de